News
EDCON to Take Part in Automechanika Dubai 2026 Again
EDCON is pleased to announce its participation in Automechanika Dubai 2026, the leading international trade show for the automotive aftermarket in the Middle East. The event will take place from 10 to 12 November 2026 at the Dubai Exhibition Centre, Dubai, UAE. Automechanika Dubai brings together automotive manufacturers, distributors, industry experts and professionals from around […]
01.10.2026
Battery operation in hot climates: the main risks
Operating a car battery at high temperatures requires a special approach. Although many consider winter cold to be the main risk, from a technical point of view, heat often causes no less damage to the battery, and often even more lasting damage. High air temperature and heating of the engine compartment accelerate electrochemical reactions, increase […]
24.07.2026
EDCON DC70720R battery: technical characteristics and applicability
The EDCON DC70720R is a starter lead—acid battery designed for use as the main source of electrical energy in passenger cars with an on-board power supply of 12 V. The model belongs to the European design range and is made in the L3 standard size, which determines its compatibility with a large number of modern […]
13.05.2026
Technologies used in the manufacture of lead gratings
The lead grid is the supporting structural element of the electrode of the EDCON lead-acid battery and simultaneously performs the functions of the mechanical frame of the active mass and the current-carrying conductor. The internal resistance of the battery, the cold-scroll current, the cyclic resource, the corrosion resistance in the sulfuric acid environment and the […]
13.05.2026
Banks inside Edcon batteries: What are they and why are they needed?
Cans are sealed enclosures inside the battery, in which the main working elements are located: plates and electrolyte. They create the necessary environment for chemical reactions in which the battery stores and outputs energy. In fact, one can is one battery. Inside each case there are all the necessary components for converting chemical energy into […]
09.04.2026
Why should you choose the same type of battery when replacing the battery in a car with AGM technology?
If an AGM (Absorbent Glass Mat) battery is installed in your car, then it is extremely important to choose exactly the same type of battery when replacing it. Edcon brand batteries with AGM are advanced lead—acid batteries in which the electrolyte is located inside fiberglass mats. This technology ensures tightness and eliminates leaks, as well […]
09.04.2026
Overcharging the car battery
What is overcharging a battery? Overcharging a car battery is a process of excessive charging, in which the voltage and current supplied to the battery exceed the permissible parameters set for this type of battery. As a result of overcharging, there is an overabundance of electrical energy, which not only does not increase the battery […]
11.03.2026
What is an electrolyte and why is it needed in a battery?
Lead-acid batteries remain one of the most widely used energy sources due to their reliability, accessibility and simplicity of design. The main role in their work is played by a liquid electrolyte, which not only ensures the transfer of ions between the electrodes, but also participates in chemical reactions that convert chemical energy into electrical […]
10.03.2026
Edcon AGM Battery Manufacturing Technology
Automotive batteries of the AGM (Absorbent Glass Mat) type are modern energy carriers, in the design of which fiberglass separators play an important role. These components ensure high energy density, safety, and long battery life. The Edcon brand uses innovative technologies based on high-tech methods of forming active materials and the production of high-quality fiberglass […]
11.02.2026
Ca/Ca Edcon Battery Manufacturing Technology
Edcon batteries manufactured using Ca/Ca technology represent a modern solution in the field of battery technology based on the use of calcium alloys in order to increase durability and reliability. Their design is based on a special combination of active materials, where the anodes and cathodes are made of alloys with high electrical conductivity and […]
10.02.2026
Results of the Automechanika 2025 exhibition
Once again, the EDCON brand presented its latest innovations and achievements in the field of automotive batteries at the largest international exhibition Automechanika 2025, which took place from December 9 to 11 in Dubai. This significant event brought together automotive industry professionals from all over the world under one roof of the Dubai World Trade […]
16.12.2025
We invite you to visit the EDCON booth at Automechanika DUBAI 2025
The EDCON brand once again participated in the international Automechanika exhibition, which is being held from December 9 to 11, 2025 at the Dubai World Trade Centre in Dubai, UAE. The Automechanika exhibition is a meeting place for automotive industry professionals from all over the world, created to exchange ideas and innovations. At the same […]
09.12.2025
Polarity Features of European Batteries
The polarity of European batteries has a number of distinctive features that must be taken into account when choosing and installing a battery in a motorcycle, car or other vehicle. Main polarity characteristics of European batteries: European Battery Standards. Batteries correspond to standards such as DIN (Deutsches Institut für Normung), EN (European standard) or IEC […]
03.10.2025
EDCON at Automechanika DUBAI 2025
Dear partners! We are pleased to announce our participation in the Automechanika 2025 international exhibition and would like to invite you to visit our stand! The exhibition will be held in Dubai from December 9 to 11, 2025, at the Dubai World Trade Center (DWTC). The exhibition will be open from 10:00 a.m. to 6:00 […]
07.08.2025
How to Dispose of Car Batteries: Basic Guidelines
Sooner or later, an EDCON battery in your car will go out of service. Its service life depends on several factors: the type of battery, the conditions of its operation, and the degree of care it receives during operation. On average, it can last up to 7 years, after which you will be faced with […]
17.04.2025
EDCON at Automechanika 2024
Once again, the EDCON label showcased its latest developments and achievements in the field of car batteries at the biggest international trade fair Automechanika 2024, which was held from September 10 to 14 in Frankfurt. This landmark event brought together automotive industry professionals from all over the world, creating a unique space for exchanging ideas […]
30.09.2024
EDCON at Automechanika 2024
We are pleased to invite you to the international trade fair Automechanika 2024 to be held in Frankfurt on September 10-14. All the latest achievements of the global automotive industry will be showcased in one place. Our super team will present the strong brand EDCON. EDCON is a brand of batteries for passenger cars and […]
21.08.2024
How to choose the right battery for a car?
Are you considering replacing your battery? If so, this information will help you make an informed decision. Here are top 5 features you should pay attention to when selecting a battery: Battery type: When choosing a new battery, you should consult the user manual for your vehicle and check the specifications of the previous […]
07.06.2024
How to Choose a Battery for a Truck?
«Work done, have fun» would be an ideal scenario when you buy a car battery. But this is not how it’s supposed to be because battery charge level should be checked not only after you get into an emergency situation. It needs to be under control…
29.11.2023
What Types of Batteries are There?
The battery is a source of starting current in a vehicle, which ensures engine start and operation of devices connected to the on–board network when the engine is turned off. There are several types of such devices available today. To make the right choice, one must know what types of batteries there are, as well as their strong and weak points.
29.11.2023
Car Battery Issues: Types and Causes
The battery is one of the crucial components in a vehicle. In the event of a battery malfunction, the operation of a vehicle often becomes impossible. In case of some breakdowns, you can take measures yourself to prevent the battery from complete failure.
29.11.2023
What is an AGM Battery?
AGM batteries were created in the 1970s for military equipment. The devices were used in boats, submarines and airplanes. Subsequently, models designed for cars appeared. They quickly gained popularity due to their high performance and efficiency. Differences of AGM batteries from other models AGM batteries have a number of fundamental differences from lead-acid batteries. […]
01.10.2023
Extend Battery Life: What You Need to Know
Increase battery life: what you need to know The battery accumulates energy when connected to a DC source, and then converts it into electricity and transmits it to devices connected to the vehicle network. The devices work for a long time, but the number of charge/discharge cycles is limited. This means that you will have […]
01.10.2023
Why Does the Electrolyte in the Battery Boil?
«Work done, have fun» would be an ideal scenario when you buy a car battery.
01.10.2023
